MSB3270:处理器架构之间的不匹配 - Fakes Framework

时间：2023-03-30
本文介绍了MSB3270:处理器架构之间的不匹配 - Fakes Framework的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！

问题描述

由于我在 UnitTest 中使用 Fakes Framework，因此收到以下 MSBuild 警告.

Since I use Fakes Framework in my UnitTest, I get the following MSBuild warning.

警告 MSB3270:正在构建的项目MSIL"的处理器架构与参考DocumentServiceModel"、x86"的处理器架构不匹配.这种不匹配可能会导致运行时失败.请考虑通过配置管理器更改项目的目标处理器体系结构，以便在项目和参考之间对齐处理器体系结构，或者依赖具有与项目的目标处理器体系结构匹配的处理器体系结构的参考.[C:ProjekteXXXXXXXXXSourceTestingUTXXX.UnitTestobjDebugFakesppsmf.csproj]

warning MSB3270: There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "DocumentServiceModel", "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take a dependency on references with a processor architecture that matches the targeted processor architecture of your project. [C:ProjekteXXXXXXXXXSourceTestingUTXXX.UnitTestobjDebugFakesppsmf.csproj]

解决方案中所有项目的平台目标设置为x86.

The platform target of all projects in the solution is set to x86.

我怎样才能摆脱这个构建警告?

How can I get rid of this build warning?

更新1:

我认为问题在于，Fakes Framework 创建了一个具有平台目标任何 CPU"的动态项目.

I think the problem is, that the Fakes Framework creates a dynamic projekt with a platform target "Any CPU".

(C:ProjekteXXXXXXXXXSourceTestingUTXXX.UnitTestobjDebugFakesppsmf.csproj)

(C:ProjekteXXXXXXXXXSourceTestingUTXXX.UnitTestobjDebugFakesppsmf.csproj)

这个动态项目引用了我的项目中的程序集，该项目以平台目标x86"运行.

This dynamic project references the assemblies from my projekt, which runs with a platform target "x86".

我不知道如何将动态 Fakes 项目更改为x86".

I have no idea, how to change the dynamic Fakes projekt to "x86".

更新 2:

我创建了一个示例项目，但收到了同样的警告:

I created a sample project and I get the same warning:

Warning 1   There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "MSBErrorTest", "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take a dependency on references with a processor architecture that matches the targeted processor architecture of your project. [C:ProjekteMSBErrorTestUnitTestProject1objDebugFakesmsbetf.csproj] UnitTestProject1

UnitTest csproj:

UnitTest csproj:

    <?xml version="1.0" encoding="utf-8"?>
    <Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
      <PropertyGroup>
        <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
        <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
        <ProjectGuid>{4B14EC56-DDC7-4A16-92BA-2D2881E695D1}</ProjectGuid>
        <OutputType>Library</OutputType>
        <AppDesignerFolder>Properties</AppDesignerFolder>
        <RootNamespace>UnitTestProject1</RootNamespace>
        <AssemblyName>UnitTestProject1</AssemblyName>
        <TargetFrameworkVersion>v4.5</TargetFrameworkVersion>
        <FileAlignment>512</FileAlignment>
        <ProjectTypeGuids>{3AC096D0-A1C2-E12C-1390-A8335801FDAB};{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}</ProjectTypeGuids>
        <VisualStudioVersion Condition="'$(VisualStudioVersion)' == ''">10.0</VisualStudioVersion>
        <VSToolsPath Condition="'$(VSToolsPath)' == ''">$(MSBuildExtensionsPath32)MicrosoftVisualStudiov$(VisualStudioVersion)</VSToolsPath>
        <ReferencePath>$(ProgramFiles)Common Filesmicrosoft sharedVSTT$(VisualStudioVersion)UITestExtensionPackages</ReferencePath>
        <IsCodedUITest>False</IsCodedUITest>
        <TestProjectType>UnitTest</TestProjectType>
      </PropertyGroup>
      <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
        <DebugSymbols>true</DebugSymbols>
        <DebugType>full</DebugType>
        <Optimize>false</Optimize>
        <OutputPath>binDebug</OutputPath>
        <DefineConstants>DEBUG;TRACE</DefineConstants>
        <ErrorReport>prompt</ErrorReport>
        <WarningLevel>4</WarningLevel>
        <PlatformTarget>x86</PlatformTarget>
      </PropertyGroup>
      <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
        <DebugType>pdbonly</DebugType>
        <Optimize>true</Optimize>
        <OutputPath>binRelease</OutputPath>
        <DefineConstants>TRACE</DefineConstants>
        <ErrorReport>prompt</ErrorReport>
        <WarningLevel>4</WarningLevel>
        <PlatformTarget>x86</PlatformTarget>
      </PropertyGroup>
      <ItemGroup>
        <Reference Include="Microsoft.QualityTools.Testing.Fakes, Version=11.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL" />
        <Reference Include="MSBErrorTest.Fakes">
          <HintPath>FakesAssembliesMSBErrorTest.Fakes.dll</HintPath>
        </Reference>
        <Reference Include="System" />
      </ItemGroup>
      <Choose>
        <When Condition="('$(VisualStudioVersion)' == '10.0' or '$(VisualStudioVersion)' == '') and '$(TargetFrameworkVersion)' == 'v3.5'">
          <ItemGroup>
            <Reference Include="Microsoft.VisualStudio.QualityTools.UnitTestFramework, Version=10.1.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL" />
          </ItemGroup>
        </When>
        <Otherwise>
          <ItemGroup>
            <Reference Include="Microsoft.VisualStudio.QualityTools.UnitTestFramework" />
          </ItemGroup>
        </Otherwise>
      </Choose>
      <ItemGroup>
        <Compile Include="UnitTest1.cs" />
        <Compile Include="PropertiesAssemblyInfo.cs" />
      </ItemGroup>
      <ItemGroup>
        <ProjectReference Include="..MSBErrorTestMSBErrorTest.csproj">
          <Project>{f1ae6c89-6f6a-404e-b9e2-10ee2f66942f}</Project>
          <Name>MSBErrorTest</Name>
        </ProjectReference>
      </ItemGroup>
      <ItemGroup>
        <Fakes Include="FakesMSBErrorTest.fakes" />
      </ItemGroup>
      <Choose>
        <When Condition="'$(VisualStudioVersion)' == '10.0' And '$(IsCodedUITest)' == 'True'">
          <ItemGroup>
            <Reference Include="Microsoft.VisualStudio.QualityTools.CodedUITestFramework, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
              <Private>False</Private>
            </Reference>
            <Reference Include="Microsoft.VisualStudio.TestTools.UITest.Common, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
              <Private>False</Private>
            </Reference>
            <Reference Include="Microsoft.VisualStudio.TestTools.UITest.Extension, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
              <Private>False</Private>
            </Reference>
            <Reference Include="Microsoft.VisualStudio.TestTools.UITesting, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
              <Private>False</Private>
            </Reference>
          </ItemGroup>
        </When>
      </Choose>
      <Import Project="$(VSToolsPath)TeamTestMicrosoft.TestTools.targets" Condition="Exists('$(VSToolsPath)TeamTestMicrosoft.TestTools.targets')" />
      <Import Project="$(MSBuildToolsPath)Microsoft.CSharp.targets" />
      <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
           Other similar extension points exist, see Microsoft.Common.targets.
      <Target Name="BeforeBuild">
      </Target>
      <Target Name="AfterBuild">
      </Target>
      -->
    </Project>

类库 csproj:

<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <Import Project="$(MSBuildExtensionsPath)$(MSBuildToolsVersion)Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)$(MSBuildToolsVersion)Microsoft.Common.props')" />
  <PropertyGroup>
    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
    <ProjectGuid>{F1AE6C89-6F6A-404E-B9E2-10EE2F66942F}</ProjectGuid>
    <OutputType>Library</OutputType>
    <AppDesignerFolder>Properties</AppDesignerFolder>
    <RootNamespace>MSBErrorTest</RootNamespace>
    <AssemblyName>MSBErrorTest</AssemblyName>
    <TargetFrameworkVersion>v4.5</TargetFrameworkVersion>
    <FileAlignment>512</FileAlignment>
  </PropertyGroup>
  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
    <DebugSymbols>true</DebugSymbols>
    <DebugType>full</DebugType>
    <Optimize>false</Optimize>
    <OutputPath>binDebug</OutputPath>
    <DefineConstants>DEBUG;TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
    <PlatformTarget>x86</PlatformTarget>
  </PropertyGroup>
  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
    <DebugType>pdbonly</DebugType>
    <Optimize>true</Optimize>
    <OutputPath>binRelease</OutputPath>
    <DefineConstants>TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
    <PlatformTarget>x86</PlatformTarget>
  </PropertyGroup>
  <ItemGroup>
    <Reference Include="System" />
    <Reference Include="System.Core" />
    <Reference Include="System.Xml.Linq" />
    <Reference Include="System.Data.DataSetExtensions" />
    <Reference Include="Microsoft.CSharp" />
    <Reference Include="System.Data" />
    <Reference Include="System.Xml" />
  </ItemGroup>
  <ItemGroup>
    <Compile Include="Class1.cs" />
    <Compile Include="PropertiesAssemblyInfo.cs" />
  </ItemGroup>
  <Import Project="$(MSBuildToolsPath)Microsoft.CSharp.targets" />
  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
       Other similar extension points exist, see Microsoft.Common.targets.
  <Target Name="BeforeBuild">
  </Target>
  <Target Name="AfterBuild">
  </Target>
  -->
</Project>

更新3:

我将配置更改为如下所示.

I changed my config to look like this.

  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|x86'">
    <DebugSymbols>true</DebugSymbols>
    <OutputPath>binx86Debug</OutputPath>
    <DefineConstants>DEBUG;TRACE</DefineConstants>
    <DebugType>full</DebugType>
    <PlatformTarget>x86</PlatformTarget>
    <ErrorReport>prompt</ErrorReport>
    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
  </PropertyGroup>

但我仍然收到警告

推荐答案

我已收到微软针对此问题的回复

I have got a response from Microsoft for this issue

http://connect.microsoft.com/VisualStudio/feedback/details/804933/msb3270-mismatch-between-the-processor-architecture-fakes-framework

Visual Studio 2012:

在FakesMSBErrorTestClass.fakes"文件中创建以下元素在假货"节点下:

Create the following element in "FakesMSBErrorTestClass.fakes" file under 'Fakes' node:

<Compilation>
 <Property Name="PlatformTarget">x86</Property>
</Compilation>

Visual Studio 2013:

此问题已在最新版本(即 Visual Studio 2013)中得到修复

This issue has been fixed in the latest release i.e. Visual Studio 2013

这篇关于MSB3270:处理器架构之间的不匹配 - Fakes Framework的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持html5模板网！

上一篇：加快 ASP.NET 中的构建时间 下一篇：使用 Roslyn 进行编译时源代码修改

相关文章

最新文章

Copyright © 2022-2023 HTML5模板网 版权所有并保留所有权