gcc 优化标志 -O3 使代码比 -O2 慢

gcc -O2 使用分支(对于 gcc5.x 及更早版本)，由于您的数据已排序，因此可以很好地预测.由于现代 CPU 使用分支预测来处理控制依赖关系，因此循环携带的依赖关系链更短:只是一个 add(1 个周期延迟).

每次迭代中的比较和分支是独立的，这要归功于分支预测 + 推测执行，这让执行在确定分支方向之前继续执行.

.L83: # gcc -O2 的内部循环movsx rcx, DWORD PTR [rdx] # 加载从 int32 到 int64 的符号扩展cmp ecx, 127jle .L82 # 条件跳转到下一条指令添加 rbp, rcx # sum+=data[c].L82:添加 rdx, 4cmp rbx, rdx.L83

有两个循环携带的依赖链:sum 和循环计数器.sum 为 0 或 1 个周期长，循环计数器始终为 1 个周期长.但是，循环在 Sandybridge 上是 5 个融合域 uops，因此无论如何它都无法以每次迭代 1c 的速度执行，因此延迟不是瓶颈.

它可能大约每 2 个周期运行一次迭代(分支指令吞吐量的瓶颈)，而 -O3 循环每 3 个周期运行一次.下一个瓶颈将是 ALU uop 吞吐量:4 个 ALU uop(在未采用的情况下)但只有 3 个 ALU 端口.(ADD 可以在任何端口上运行).

此管道分析预测与您的 -O3 约 3 秒和 -O2 约 2 秒的时间非常吻合.

Haswell/Skylake 可以每 1.25 个周期运行一个未采用的情况，因为它可以在与采用的分支相同的周期内执行未采用的分支，并且有 4 个 ALU 端口.(或略低于 一个 5 uop 的循环在每个周期 4 uop 时并不是很重要).

(刚刚测试:Skylake @ 3.9GHz 1.45s 运行整个程序的branchy 版本，或1.68s 的branchless 版本.所以差异要小得多.)

g++6.3.1 使用 cmov 即使在 -O2，但 g++5.4 仍然表现得像 4.9.2.

对于 g++6.3.1 和 g++5.4，使用 -fprofile-generate/-fprofile-use 即使在 也会产生分支版本-O3(使用 -fno-tree-vectorize).

来自较新 gcc 的循环的 CMOV 版本使用 add ecx,-128/cmovge rbx,rdx 而不是 CMP/CMOV.这有点奇怪，但可能不会减慢速度.ADD 写入输出寄存器和标志，因此对物理寄存器的数量造成更大压力.但只要不是瓶颈，应该差不多.

较新的 gcc 使用 -O3 自动矢量化循环，即使仅使用 SSE2，这也是一个显着的加速.(例如，我的 i7-6700k Skylake 运行矢量化版本在 0.74 秒内，大约是标量的两倍.或 -O3 -march=native 在 0.35 秒内，使用 AVX2 256b 向量).

矢量化版本的指令看起来很多，但也不算太糟糕，而且大部分都不是循环携带的 dep 链的一部分.它只需要在接近尾声时解压为 64 位元素.但是，它执行 pcmpgtd 两次，因为它没有意识到当条件已经将所有负整数归零时，它可以只进行零扩展而不是符号扩展.

I find this topic Why is it faster to process a sorted array than an unsorted array? . And try to run this code. And I find strange behavior. If I compile this code with -O3 optimization flag it takes 2.98605 sec to run. If I compile with -O2 it takes 1.98093 sec. I try to run this code several times(5 or 6) on the same machine in the same environment, I close all other software(chrome, skype etc).

gcc --version
gcc (Ubuntu 4.9.2-0ubuntu1~14.04) 4.9.2
Copyright (C) 2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

So please can you explain to me why this happens? I read gcc manual and I see that -O3 includes -O2. Thank you for help.

P.S. add code

#include <algorithm>
#include <ctime>
#include <iostream>

int main()
{
    // Generate data
    const unsigned arraySize = 32768;
    int data[arraySize];

    for (unsigned c = 0; c < arraySize; ++c)
        data[c] = std::rand() % 256;

    // !!! With this, the next loop runs faster
    std::sort(data, data + arraySize);

    // Test
    clock_t start = clock();
    long long sum = 0;

    for (unsigned i = 0; i < 100000; ++i)
    {
        // Primary loop
        for (unsigned c = 0; c < arraySize; ++c)
        {
            if (data[c] >= 128)
                sum += data[c];
        }
    }

    double elapsedTime = static_cast<double>(clock() - start) / CLOCKS_PER_SEC;

    std::cout << elapsedTime << std::endl;
    std::cout << "sum = " << sum << std::endl;
}

gcc -O3 uses a cmov for the conditional, so it lengthens the loop-carried dependency chain to include a cmov (which is 2 uops and 2 cycles of latency on your Intel Sandybridge CPU, according to Agner Fog's instruction tables. See also the x86 tag wiki). This is one of the cases where cmov sucks.

If the data was even moderately unpredictable, cmov would probably be a win, so this is a fairly sensible choice for a compiler to make. (However, compilers may sometimes use branchless code too much.)

I put your code on the Godbolt compiler explorer to see the asm (with nice highlighting and filtering out irrelevant lines. You still have to scroll down past all the sort code to get to main(), though).

.L82:  # the inner loop from gcc -O3
    movsx   rcx, DWORD PTR [rdx]  # sign-extending load of data[c]
    mov     rsi, rcx
    add     rcx, rbx        # rcx = sum+data[c]
    cmp     esi, 127
    cmovg   rbx, rcx        # sum = data[c]>127 ? rcx : sum
    add     rdx, 4          # pointer-increment
    cmp     r12, rdx
    jne     .L82

gcc could have saved the MOV by using LEA instead of ADD.

The loop bottlenecks on the latency of ADD->CMOV (3 cycles), since one iteration of the loop writes rbx with CMO, and the next iteration reads rbx with ADD.

The loop only contains 8 fused-domain uops, so it can issue at one per 2 cycles. Execution-port pressure is also not as bad a bottleneck as the latency of the sum dep chain, but it's close (Sandybridge only has 3 ALU ports, unlike Haswell's 4).

BTW, writing it as sum += (data[c] >= 128 ? data[c] : 0); to take the cmov out of the loop-carried dep chain is potentially useful. Still lots of instructions, but the cmov in each iteration is independent. This compiles as expected in gcc6.3 -O2 and earlier, but gcc7 de-optimizes into a cmov on the critical path (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82666). (It also auto-vectorizes with earlier gcc versions than the if() way of writing it.)

Clang takes the cmov off the critical path even with the original source.

gcc -O2 uses a branch (for gcc5.x and older), which predicts well because your data is sorted. Since modern CPUs use branch-prediction to handle control dependencies, the loop-carried dependency chain is shorter: just an add (1 cycle latency).

The compare-and-branch in every iteration is independent, thanks to branch-prediction + speculative execution, which lets execution continue before the branch direction is known for sure.

.L83:   # The inner loop from gcc -O2
    movsx   rcx, DWORD PTR [rdx]  # load with sign-extension from int32 to int64
    cmp     ecx, 127
    jle     .L82        # conditional-jump over the next instruction 
    add     rbp, rcx    # sum+=data[c]
.L82:
    add     rdx, 4
    cmp     rbx, rdx
    jne     .L83

There are two loop-carried dependency chains: sum and the loop-counter. sum is 0 or 1 cycle long, and the loop-counter is always 1 cycle long. However, the loop is 5 fused-domain uops on Sandybridge, so it can't execute at 1c per iteration anyway, so latency isn't a bottleneck.

It probably runs at about one iteration per 2 cycles (bottlenecked on branch instruction throughput), vs. one per 3 cycles for the -O3 loop. The next bottleneck would be ALU uop throughput: 4 ALU uops (in the not-taken case) but only 3 ALU ports. (ADD can run on any port).

This pipeline-analysis prediction matches pretty much exactly with your timings of ~3 sec for -O3 vs. ~2 sec for -O2.

Haswell/Skylake could run the not-taken case at one per 1.25 cycles, since it can execute a not-taken branch in the same cycle as a taken branch and has 4 ALU ports. (Or slightly less since a 5 uop loop doesn't quite issue at 4 uops every cycle).

(Just tested: Skylake @ 3.9GHz runs the branchy version of the whole program in 1.45s, or the branchless version in 1.68s. So the difference is much smaller there.)

g++6.3.1 uses cmov even at -O2, but g++5.4 still behaves like 4.9.2.

With both g++6.3.1 and g++5.4, using -fprofile-generate / -fprofile-use produces the branchy version even at -O3 (with -fno-tree-vectorize).

The CMOV version of the loop from newer gcc uses add ecx,-128 / cmovge rbx,rdx instead of CMP/CMOV. That's kinda weird, but probably doesn't slow it down. ADD writes an output register as well as flags, so creates more pressure on the number of physical registers. But as long as that's not a bottleneck, it should be about equal.

Newer gcc auto-vectorizes the loop with -O3, which is a significant speedup even with just SSE2. (e.g. my i7-6700k Skylake runs the vectorized version in 0.74s, so about twice as fast as scalar. Or -O3 -march=native in 0.35s, using AVX2 256b vectors).

The vectorized version looks like a lot of instructions, but it's not too bad, and most of them aren't part of a loop-carried dep chain. It only has to unpack to 64-bit elements near the end. It does pcmpgtd twice, though, because it doesn't realize it could just zero-extend instead of sign-extend when the condition has already zeroed all negative integers.

这篇关于gcc 优化标志 -O3 使代码比 -O2 慢的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持html5模板网！